pullies

blkcoupe · Posted: Sat Jan 08, 2011 12:58 pm Post subject: pullies

So I was taking a friend for a ride and right as I got into boost I hear a clunk and smelled burning rubber I was like wtf?? Since I was only a little ways from my house I drove it home and popped my hood and what do I see my belt is shredded and my blower pulley is gone....I guess now I know why my car was squeeking so damn bad...
_________________
2010 Silver Member
Born on 7/14/03 #7859 of 8394

blkcoupe · Posted: Sat Jan 08, 2011 1:21 pm Post subject:

_________________
2010 Silver Member
Born on 7/14/03 #7859 of 8394

D3Racing · Posted: Sat Jan 08, 2011 1:33 pm Post subject:

Stock pulles blow, all of them should be replaced. They are only stamped peices and fail all the time.
_________________
www.D3RACING.com
2008 WRX, 2006 F250, 2003 Cobra, 1986 VMAX

blkcoupe · Posted: Sat Jan 08, 2011 1:53 pm Post subject:

that was my 2.80 UPR pulley that flew off
_________________
2010 Silver Member
Born on 7/14/03 #7859 of 8394

D3Racing · Posted: Sat Jan 08, 2011 2:04 pm Post subject:

Who did the pulley swap? Did it come off in one piece.
_________________
www.D3RACING.com
2008 WRX, 2006 F250, 2003 Cobra, 1986 VMAX

blkcoupe · Posted: Sat Jan 08, 2011 2:15 pm Post subject:

wayne did it and i dont know i heard a clunk and saw my boost just drop to 0 i went back and looked for the pulley but that thing is long gone
_________________
2010 Silver Member
Born on 7/14/03 #7859 of 8394

TOWGUNNER · Posted: Sat Jan 08, 2011 2:28 pm Post subject:

wow that sucks

blkcoupe · Posted: Sat Jan 08, 2011 2:30 pm Post subject:

so dose anybody have an extra 2.80 pulley and the tool laying around?
_________________
2010 Silver Member
Born on 7/14/03 #7859 of 8394

D3Racing · Posted: Sat Jan 08, 2011 2:36 pm Post subject:

You don't need a tool, I can show you the tool at Auto Zone or Advanced to rent to do the install. No pulley here though
_________________
www.D3RACING.com
2008 WRX, 2006 F250, 2003 Cobra, 1986 VMAX

D3Racing · Posted: Sat Jan 08, 2011 2:37 pm Post subject:

SVTP to find a used one, that is where I traded my 2.76 for a 2.80, seems like people are changing plans all the time there, or I can get you a new one.
_________________
www.D3RACING.com
2008 WRX, 2006 F250, 2003 Cobra, 1986 VMAX

blkcoupe · Posted: Sat Jan 08, 2011 2:40 pm Post subject:

im just going to go with a new one. you wouldnt happen to have the pulley tool do you?
_________________
2010 Silver Member
Born on 7/14/03 #7859 of 8394

D3Racing · Posted: Sat Jan 08, 2011 2:49 pm Post subject:

I rented a puller and installer when I did my swap, since yours is off you only need an installer, I think it is the power steering pump pulley installer from auto zone but if I look at the pics I can tell you.
_________________
www.D3RACING.com
2008 WRX, 2006 F250, 2003 Cobra, 1986 VMAX

D3Racing · Posted: Sat Jan 08, 2011 2:50 pm Post subject:

I wouldn't use a UPR one again though, I have a RR one now after my BIlletflow, no problems with either of those.
_________________
www.D3RACING.com
2008 WRX, 2006 F250, 2003 Cobra, 1986 VMAX

blkcoupe · Posted: Sat Jan 08, 2011 3:35 pm Post subject:

ok cool and im going with the RR pulley
_________________
2010 Silver Member
Born on 7/14/03 #7859 of 8394

ScreamingFast · Site Admin Joined: Aug 17, 2008 Posts: 11378

Damn dude that sux, sorry to hear that. Good luck getting your pulley back on there. Wish I had a spare one laying around.
_________________


Create an Account		Home · WOT Forums · WOT Photos · WOT Videos · WOT Classified Ads · WOT Club Calendar · Regional Radar · Track Weather · Your Account